Making the Wavy Vase

Reclaimed walnut, pallet wood, and ~200hrs (half of that might be sanding)
Share & Subscribe? http://bit.ly/JackmanWorks
Details! ▼

————————————

\\ SUPPORT MY SPONSORS \\

𝐀𝐫𝐛𝐨𝐫𝐭𝐞𝐜𝐡 𝐓𝐨𝐨𝐥𝐬
► TURBO Plane – https://bit.ly/2Ss7Ww6
► Mini TURBO – https://bit.ly/2SttIQ9
► Mini Carver – https://bit.ly/3dcCLwR
► Contour Sander – https://bit.ly/35kBSzu
► Mini Pro – https://bit.ly/3aXNXf0

𝐈𝐒𝐎𝐭𝐮𝐧𝐞𝐬 (use code "Jackman10" for $10 off!)
► Get your hands on the best bluetooth hearing protection on the market (my go-to are the ISOtunes PRO 2.0) – https://bit.ly/2WkJ9LB

𝐓𝐨𝐭𝐚𝐥𝐁𝐨𝐚𝐭 (use code "Jackman15" for 15% off anything from TB!)
► Traditional epoxy resin – https://bit.ly/2Wcv8AR
► Wood Sealer – https://bit.ly/2SDAoes
► Halcyon Clear varnish – https://bit.ly/3cbC5Yo

————————————

\\ PROJECT SPECIFIC STUFF \\
► Full build article – https://bit.ly/2VRsXCu

Notable Tools used on this build:
► Respirator (use code "Jackman" for 5% off!) – https://bit.ly/2zOvwwn
► Air Locker denailer – https://amzn.to/35tqTnl
► MagSwitch Power Feeder Base & Finger Board (use code "JACKMAN" for 10% off!) – https://bit.ly/2Soi1KA
► MiterSet segment jig – https://bit.ly/3fb95lq
► Segmented ring spreadsheet calculator – https://bit.ly/2zJCuCR
► Steady rest – https://www.youtube.com/watch?v=_ybjFqJ1UT0

The wavy vase is constructed from reclaimed walnut beams, hardwood pallet wood slats, and a plentiful amount of wood glue. It’s 28" tall, 16" in diameter at the widest part, and weighs more than an average sized cat. It took up ~200 hours or so of my life and I think it was worth it. It’s supposed to be hard to look at, so that you can’t absorb the entirety of the piece in just a quick glance. It’s supposed to mimic nature, due to its clearly defined pattern, but also its slight inconsistencies due to it being carved by hand. It’s supposed to be busy, but organized at the same time. And it’s supposed to be at least slightly insane, much like it’s creator.

————————————

\\ GENERAL PANDERING LINKS \\
■ Website – http://www.jackmanworks.com
■ YouTube – http://www.youtube.com/jackmanworks
■ Instagram – http://www.instagram.com/jackman_works/
■ Twitter – http://www.twitter.com/jackmanworks
■ GIFs – https://giphy.com/channel/jackmanworks
■ Facebook – http://www.facebook.com/jackmanworks
Plans, stickers, t-shirts, etc: http://www.jackmanworks.com/shop

Shoutout to my top Patreon supporters!
– Dave Soetanto
– Inch Calculator
– Erik Finnestead
– Old-School DIY (@gfc62)
– Leif Hietala
– So We Made It
– Michael Daigle
– Jeff Kupitz
– Chad from ManCrafting™

————————————

\\ MUSIC \\
Music from Epidemic Sound. Try it yourself, free 30 day trial!
http://share.epidemicsound.com/jackman

More from: Jackman Works

More Woodworking

  • Woodturning: Pull Tabs, Resin & Aspen Bowl
    Earlier this year, I saw Ken over at @Moonpie Creations make a vase out of pull tabs (https://www.youtube.com/watch?v=3a8Y6HcG11k). I’ve been drinking these Bubly sparkling waters (not sponsored) and they have colorful pull tabs with various ways of saying hello on them. I thought the pull tabs with some clear resin would make an awesome rim to a […]
  • How to Clamp That? Wood Clamping Lesson on a Table Made in Cowansville, Quebec, Canada #Woodworking
    Learning how to clamp wood properly is an important skill in furniture repair. But how do you clamp something like this table support that isn’t square. The answer is "vector clamping". Watch and learn how to clamp this curved piece to repair it and make it one solid piece. This table was built by Vilas Canada, a woodworking company in […]
  • Margarita Anyone?? STTL. First time using this pigment and i like it!!
    More from GoodView Woodworks […]
  • 10 Jaw-Dropping Woodworking Shop Tours
    Watch 10 mini tours of incredible woodworking workshops with Joshua Farnsworth. See all the full tours here: https://woodandshop.com/workshops/ ✪ Subscribe to my channel for regular woodworking tutorials, workshop tours, & reviews: https://www.youtube.com/user/WoodAndShop ✪ Get free woodworking updates, tips, and workshop tours in our regular email […]
  • Creative Idea For Used Wooden Pallets // How To Make An Outdoor Bar With A Pallet – DIY
    #Woodworking#Pallets Creative Idea For Used Wooden Pallets // How To Make An Outdoor Bar With A Pallet – DIY Woodworking News Source: DIY Creation Woodworking […]
  • Make a Simple Circular Saw Cutting Guide | Rockler Skill Builders
    Really don’t want to spend $100s of dollars for a track saw or a plunge saw. So i am figuring out how to do this on my own. There are 2 versions below the firs I would do for very fine work the 2nd for rough cuts. […]
  • Blade guides for my 26″ bandsaw
    Making the blade guides for my big bandsaw. These are the same design as the ones I made for my 20" bandsaw back in 2016. http://woodgears.ca/big_bandsaw/guides26.html Woodworking News Source: Matthias Wandel […]
  • Amazing Skills Carpenter Woodworking Curved – How To Diy A Support For Cabinet
    Amazing Skills Carpenter Woodworking Curved – How To Diy A Support For Cabinet Woodworking News Source: Amazing Woodworking […]
  • DIY Mobile Project Center – DeWalt Workbench Walkthrough
    Took a quick break to shoot this Walkthrough video of the Bench. Hope you enjoy! Link to Plans: https://etsy.me/2yqieT1 Link to the products I used to build the workbench: […]
  • My simple, no measure, pizza crust recipe
    Too many people go through their entire lives lacking the confidence or knowledge needed to make a good pizza. If your crust recipe is hit-or-miss, this video might help you hit the mark a little more consistently. If I come up with any significant updates I’ll post it here in the description, but my intent is to keep this simple. I also post […]
  • Make cheap chisels AMAZING with this traditional handle.
    Remake your budget chisels with some quick metal-work and a fancy new handle. More video and exclusive content: http://www.patreon.com/rexkrueger Get the London Pattern Drawing (FREE): http://www.rexkrueger.com/store Get these chisels! https://amzn.to/2LtYDeu (affiliate) Other Tools in this Video: (affiliate) Pony Pipe Clamp: https://amzn.to/37j0laU […]
  • Thin-kerf vs. full kerf- Don’t choose the wrong table saw blade!
    When you use this link to visit our sponsor, you support us► Sawblade.com: https://www.sawblade.com/ Subscribe (free) to Stumpy Nubs Woodworking Journal e-Magazine► http://www.stumpynubs.com/subscribe.html Follow us on social media► Instagram: https://www.instagram.com/stumpynubs/ Twitter: https://twitter.com/StumpyNubs Facebook: […]
  • Furniture Forensics with a 19th Century Table
    Rescued from the trash, this table is filled with clues about who made it and how! More video and exclusive content: http://www.patreon.com/rexkrueger Plans, t-shirts, and hoodies: http://www.rexkrueger.com/store Become a member of this channel! Get custom badges and emojis you can use during chats: […]
  • 7 Simple Holiday Ornaments
    FREE PLANS for The BASIC MOBILE WORKBENCH ►► http://basicmobileworkbench.com/ I used 7 different saws to make 7 different ornaments! More info and cutting templates ►► http://woodworkingformeremortals.com/seven-simple-wooden-ornaments-anyone-can-make/ 12 Days of CRAFT-Mas playlist: […]
  • SAWMILLING A MASSIVE OAK – PART 3.
    A few more slabs cut and stacked, but the day got cut short due to a bearing exploding. Instagram: @backstromwoodwork More from Backstrom Woodwork […]
  • The Ultimate Holiday Gift Buying Guide
    Purchasing a gift from a small business in our woodworking and maker community will go a long way in strengthening the community. https://jayscustomcreations.com/2020/11/holiday-gift-buying-guide/ More from: Jay Bates […]
  • MORE MISTAKES – The Race To Finish Before The Baby Comes!
    MORE MISTAKES. As we get down to the wire we’re hitting what seems to be more and more hiccups. SPONSORED BY: Timberland PRO – http://bit.ly/JM_TimberlandPRO My Favorite Boots! – https://amzn.to/3pHY7c9 Check out episode 1 – 3 8 Weeks to Finish My House……Before – […]
  • My MOST IMPORTANT Build To Date! 👶🏻
    This build was by far my MOST IMPORTANT Build to date. With the baby due any day now, my wife requested a rocking chair. Instead of dropping 3k on one, i decided to try building it for myself. NEW MUGS ☕️ & MERCH 👕 ! – https://shop.johnmalecki.com/collections/shirts/products/squirrelly-squad-mug Check out the entire RACE TO FINISH THE HOUSE […]
  • Epoxy River Rock Table Tutorial (Step By Step)
    Epoxy river rock table DIY tutorial digital plans here: https://bit.ly/2Cf4Djt In this video, learn how to make an epoxy river rock table from reclaimed live edge cypress wood. I show you how to embed acrylic rocks in epoxy resin and how to mix epoxy glow powder/pigment to make this epoxy table top glow in the dark. Learn how to use rubio monocoat over […]
  • 16 Instant Workshop Storage Solutions
    Big thank you to Smart Jars for sponsoring this video! Check out their amazing solutions to bring order to your cluttered work areas here: https://bit.ly/3nH60gy Patreon: https://www.patreon.com/user?u=257047 Instagram: https://www.instagram.com/wilker_dos Website: https://www.wilkerdos.com Facebook: https://www.facebook.com/wilkerdos Want to support […]

Breaking Woodworking News